Traveling Column Milling Machine FENIX

To see this video you must accept marketing cookies, it can be configured here

What makes the difference?

The FENIX represents a new concept of travelling column machine with lateral ram.
Highly robust based on a system of L-guided ram. High precision thanks to the mechanical system of ram droop correction. A flexible machine appropriate for roughing and finishing operations.

Eco Design

Stand-by function and Auto Switch off function, saving 20% of the total energy machine consumption.
High Feed Rates

25 m/min feed in the X, Y and Z axes, thanks to the linear guide system.
High Geometrical Precision

Roughing capacity + Machine geometry stability.

Ram with generous cross section equipped with 3 guide-ways ensuring the maximum accuracy and robustness.
High Geometrical Precision

Longitudinal saddle integrated in the machine column as a single monolithic part.

Maximum sturdiness.

Maximum geometric precision.

Minimum column shift error.

Maximum machining stability.
L Guide-way System Configuration

L-shaped guide system:

Greater rigidity and stability during machining.

Greater geometrical precision.

Less ram droop effect.

6 vertical movementsliders ensuring good machine behaviour.
L Guide-way System Configuration

L-shaped guide system:

Greater rigidity and stability during machining.

Greater geometrical precision.

Less ram droop effect.

6 vertical movementsliders ensuring good machine behaviour.
Mechanical Compensation System

Pulling bars for fine tuning adjustment of ram droop effect.

Mechanical Compensation System

Direct drive transmission in the vertical axis increasing the stifness and precision.
Oversized Structural Elements

Longitudinal saddle integrated in the machine column as a single monolithic part.

Maximum sturdiness.

Maximum geometric precision.

Minimum column shift error.

Maximum machining stability.
Oversized Structural Elements

Biggest cross sections in the market.

Ram with generous cross section equipped with 3 guide-ways ensuring the maximum accuracy and robustness.
Machine Dynamic Adjustment

Dynamic performance parametrizable in accordance with:

ROUGHING OPERATION

FINISHING OPERATION

Technical specifications

Table
Surface	mm	4,000 x 1,000 / 25,000 x 2,500
Maximum load on the table	Kg / m2	10,000 / 15,000
Traverses
Longitudinal	X mm	4,000 - 25,000
Cross	Y mm	1,250 - 1,500
Vertical	Z mm	1,500 / 2,000 / 2,300 / 2,500 / 3,000
Feeds
Maximum	X m/min	25
	Y m/min	30
	Z m/min	30
Spindle specifications
Taper		ISO-50 Big Plus / HSK-100
Programmable speed	rpm	6,000 - 6,000 - 10,000
Maximum power	kW	33 - 43 - 42
Maximum torque	Nm	990 - 1291 - 620